Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 420 g/m² Carbon Fabric Twill | HP-T421/125C

Preview: Carbon Fabric 420 g/m² Twill | HP-T421C

420 g/m² Carbon Fabric Twill | HP-T421/125C

Mobile Preview: Carbon Fabric 420 g/m² Twill | HP-T421C

420 g/m² Carbon Fabric Twill | HP-T421/125C

Product No.:: HP-T421/125C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 37,96 EUR
3-4,5 m²: per 35,96 EUR
5-9,5 m²: per 33,97 EUR
10-24,5 m²: per 31,92 EUR
25-49,5 m²: per 29,98 EUR
50-124,5 m²: per 28,50 EUR
> 124,5 m²: per 27,31 EUR

37,96 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Twill | HP-T421/125C

Weight: 420 g/m²
Weave: Twill 2/2
Width: 125 cm

Yarn type specifications:
Warp: 2,6 y/cm (12K Toray T700SC FOE 800Tex)

Weft: 2,6 y/cm (12K Toray T700SC FOE 800Tex)

Thickness: 0,64 mm

Areas of application:

Ship and boat construction, motor sport, aircraft construction, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 503 g/m²
Laminate thickness: 0,67 mm
Laminate weight: 924 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
** The length of the rolls may vary. Therefore it is possible that a position of 10m² consists of several rolls. **

Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

This product is compatible with (for example):

410 g/m² Bidiagonal Carbonfabric | HP-B415C...

Construction:	+/-45°
Fibre:	HT-Fibre
Weight:	410 g/m²
Width:	127 cm

22,97 EUR

Acrylic Cast Resin | HP-A15GB

Low heat generation
Easy to use and odourless
Possible addition of water up to 5%
Mixable with dry colour pigments
Addition of cotton flakes to increase the viscosity
Working time (pot life): 10-20 minutes (100g at 20°C)

from 20,50 EUR

Priming Wax | HP-G

Wax primer for barely wettable and porous surfacesHighly effective
Flowable and silicon free wax
Foundation for Film Release Agent HP-PVA
Good release properties
Drying time approx. 5-15 minutes

from 13,50 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Customers who bought this product bought also the following products:

160 g/m² Spread Tow Carbon Fabric Plain - 3K-Fibre | HP-P161SC

200 g/m² Carbon Fabric Twill 2/2 Spread Tow...

Construction:	Twill 2/2
Weight:	200 g/m²
Width:	125 cm

Spread Tow, strand width approx 2 mm

34,45 EUR

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR

Radius roller | HP-RR

Aluminium radius roller are used for compressing and ventin the laminates with screw fastening incl. holder and plastic grip.

Suitable for glass fabrics

Available dimensions:
Item-No.:	Diameter:	Width:
HP-RR-13x75	13 mm	75 mm
HP-RR-25x75	25 mm	75 mm
HP-RR-25x150	25 mm	150 mm
HP-RR-50x75	50 mm	75 mm
HP-RR-50x150	50 mm	150 mm

from 9,90 EUR

Spray adhesive 400 ml | HP-FIX400

To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
Application in combination with the epoxy resins from HP-Textiles
Excellent spray control with adjustable spray button and dosage valve
Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials

11,84 EUR
11,84 EUR per pcs.