Laminating System - Epoxy Resin | HP-E28L
Standard Laminating Resin, Low Viscous | Epoxy Resin HP-E28L
The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.
Features & Benefits
- Very good wetting properties of the reinforcing fibres
- Cold setting, de-mouldable at room temperature
- Free of solvents and fillers
- Improved physiological compatibility (no R62 labelling)
- Practically shrink-free curing
- Temperature resistance (Tg Max) up to 75°C
- Free of Nonylphenol and DETA.
As impregnating and laminating resins in the areas of:
- Mould-making and fixture construction, industrial parts
- Construction of sports equipment, model making
- Orthopaedic
- Vehicle substructures / motorsport
- Boat construction
- ...
Product Properties Epoxy System HP-E28L
- Colouring: Slightly bluish / green
- Mixing Ratio (by weight): 100 parts resin : 40 parts hardener
- Mixing Ratio (by volume): 100 parts resin : 44 parts hardener
- Mixed Viscosity: low viscous
- Working Time (pot life): 28 minutes (100 g at 20 °C)
- Working temperature (optimum): 15 - 25 °C
- Working temperature (minimum): 15 °C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
.jpg "Preview: 600 g/m² Bidiagonal Carbonfabric +/-45° HT-Fibre | SP-B600C")
