Core material - Sandwich material - approx. 5 mm thick | HP-CORE-5

Product No.:: HP-CORE-5
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: 15 m²

Sliding scale prices

1-2,9 m²: per 14,99 EUR
3-4,9 m²: per 12,99 EUR
5-9,9 m²: per 11,53 EUR
10-34,9 m²: per 10,32 EUR
> 34,9 m²: per 8,81 EUR

14,99 EUR

incl. 19% tax excl. Shipping costs

Description

Core material - Sandwich material - approx. 5 mm thick | HP-CORE-5

HP-CORE is a high performance non-woven fabric developed specifically for the Fibre Reinforced Plastics (FRP) industry.
Designed with a micro-cellular structure, which provides volume with a very low weight and voids that allow easy absorption of resin, HP-CORE is ideal for use as a core material in FRP sandwich constructions with polyester and epoxy resin.

Features:

Stretchable in all directions - in the wet as well as in the dry
Good drapability
Suitable for complicated shapes
Suitable for polyester, vinyl ester and epoxy resins

*Please enter below the desired quantity in m²

Areas of application:
Swimming pools, boat building (hulls, superstructures), canoes and kayaks, containers and mold making, vehicle parts (chassis, bodywork and roof boxes), motor homes and caravans, ski and snowboards, and much more.

Technical Data

Technical Data:

width	100 cm
Dry thickness (+/- 10%)	5,0 mm
Dry weight (+/-15%)	140 g/m²
Resin absorption	3,0 kg/m²
Specific weight	630 kg/m³

This product is compatible with (for example):

Spray adhesive 400 ml | HP-FIX400

To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
Application in combination with the epoxy resins from HP-Textiles
Excellent spray control with adjustable spray button and dosage valve
Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials

11,84 EUR
11,84 EUR per pcs.

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

Infusion System - Epoxy Resin | HP-E15GL

The hardener HP-E15GL allows a pot-life of 15minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

590,00 EUR
15,13 EUR per Kg