Main page » Reinforcement Fabrics » Glass Filament Fabric Finish » Unidirectional » 220 g/m² Glass filament fabric "Finish" Unidirektional | HP-U220EF

220 g/m² Glass filament fabric "Finish" Unidirektional | HP-U220EF

Name: 220 g/m² Glass filament fabric "Finish" Unidirektional | HP-U220EF
SKU: HP-U220EF
Price: 7.23 EUR
Availability: InStock

Product No.:: HP-U220EF
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,9 m²: per 7,23 EUR
3-4,9 m²: per 6,94 EUR
5-9,9 m²: per 6,65 EUR
10-24,9 m²: per 6,07 EUR
25-49,9 m²: per 5,49 EUR
50-99,9 m²: per 4,92 EUR
> 99,9 m²: per 4,19 EUR

7,23 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

220 g/m² Glass filament fabric Finish Unidirektional | HP-U220EF

Weight: 200 g/m²
Weave: Plain
Width: 100 cm

Yarn type specifications:
Warp: 6 y/cm (5x EC9-68 tex)

Weft: 7 y/cm (EC7-22 tex)

Areas of application:

Design of models-, sport equipment, airfoil coating, rotor blades, sandwich components, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 181 g/m²
Laminate thickness: 0,24 mm
Laminate weight: 401 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Standard role length: 2,5 m² / From 3 m² then the total quantity are on minimum on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

This product is compatible with (for example):

Sealant Tape | HP-ST12X3/80

Material:	Butyl Rubber
Width:	12 mm
Thickness:	3 mm
Length:	15 mtr.

10,41 EUR

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR

Scissors "OPTIMA" | HP-L1054

Lenght:	29 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

High performance laminating system HP-E29L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR

Customers who bought this product bought also the following products:

320 g/m² Glass Fabric Bidiagonal (Weight: 30 cm) | HP-B320/300E

320 g/m² Glass Fabric Bidiagonal (Width:...

Construction:	+/-45°
Fibre:	HT-Fibre
Weight:	320 g/m²
Width:	30 cm

from 17,80 EUR
0,89 EUR per m

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR