Subscribe to Newsletter

 
 
Carbon Fabric 245 g/m² Twill | HP-T240/150C
Carbon Fabric 245 g/m² Twill | HP-T240/150C
Preview: Carbon Fabric 245 g/m² Twill | HP-T240/150C
Preview: Carbon Fabric 245 g/m² Twill | HP-T240/150C
245 g/m² Carbon Fabric Twill | HP-T240/120C
Carbon Fabric 245 g/m² Twill | HP-T240/150C
Carbon Fabric 245 g/m² Twill | HP-T240/150C
Mobile Preview: Carbon Fabric 245 g/m² Twill | HP-T240/150C
Mobile Preview: Carbon Fabric 245 g/m² Twill | HP-T240/150C
TOP

245 g/m² Carbon Fabric Twill | HP-T240/120C

Product No.:
HP-T240/120C
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-2,5 m²
per 31,95 EUR
3-4,5 m²
per 30,35 EUR
5-9,5 m²
per 28,50 EUR
10-24,5 m²
per 26,95 EUR
25-49,5 m²
per 25,35 EUR
50-119,5 m²
per 23,98 EUR
> 119,5 m²
per 23,21 EUR
31,95 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Carbon Fiber Fabric Twill | HP-T240/120C

Weight: 245 g/m²
Weave: Twill 2/2
Width: 120 cm
Yarn: 3K Mitsubishi Pyrofil
 
Yarn type specifications:
Warp: 6 y/cm (3K  200Tex)
Weft: 6 y/cm (3K  200Tex)
Thickness: 0,35 mm
 
Technical Data Sheet Carbon Fabric HP-T240/150C
 
Areas of application: 
Modelling, sport equipment making, ship and boat construction, motor sport, carbon design, aircraft construction, ...
 
Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 288 g/m²
Laminate thickness: 0,39 mm
Laminate weight: 528 g/m²

** The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls. **

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

 

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:
 
Plain
  • The simplest weave
  • Very slip-resistant
  • Bad drapability
  • Suitable for flat plates or easy moulds

Twill
  • Diagonally running lines are characteristic
  • Better drapability than plain weave
  • Less slip-resistant
  • Suitable for complicated geometries

Satin
  • Suitable for complicated geometries
  • Very good drapability
  • Low slip-resistance
  • Less mesh crossing, therefore strength in the laminate
  • Leaves a very smooth surface
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Multi-Purpose System Epoxy HP-E45KL
TOP
Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR
300 g/m² Triaxial Carbonfabric | HP-T300C
300 g/m² Triaxial Carbonfabric | HP-T300C...
Construction: +45°/-45°/0°
Fibre: HT-Fibre
Weight: 300 g/m²
Width: 127 cm
21,30 EUR
Primer, undercoating, adhesion agent for epoxy resins
Primer - adhesion agent for epoxy resins...
  • PUR primer for sticking or laminating on smooth surfaces
  • High adhesion, suitable for all epoxy resins from HP-Textiles
  • Ground coat (primer for carbon design)
  • For spraying, manual application with paint-brush or roller is also possible
  • Wax free, without styrene
from 18,90 EUR
Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
  • Glow time: up to 10 hours, depending on the amount of light stored or light intensity
  • Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
  • Compatible with many basic materials 
  • Charging by: UV-radiation, daylight, artificial light and many more
from 9,98 EUR
Color Pastes | HP-FPN
Pigment paste opaque | FPN
  • Liquid Pigment pastes for colouring
  • Due to a high pigment concentration very efficient in consumption
  • Good colouring
  • Suitable for solvent free for epoxy resin and polyurethane systems​
from 3,29 EUR

Customers who bought this product bought also the following products:

Carbon Fabric 160 g/m² Twill | HP-T421C
420 g/m² Carbon Fabric Twill | HP-T421C
Weight: 420 g/m²
Weave: Twill 2/2
Width: 100 cm
31,89 EUR
Epoxy infusion resin HP-E120RI
Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR
Cotton flocks | HP-BF1
Cotton flocks | HP-BF1
  • Thickener, viscosity control
  • Reinforcement of splices, adhesive beads
  • In combination with glass fiber chips (HP-GS6) for coupling layers in mold making
from 3,50 EUR
Vacuum Bagging Film (Width: 150 cm) | HP-VFT70-150
70 g/m² Vacuum Bagging Film Tube | HP-VFT70/150...
Material: PE / PA / PE
Weight: 70 g/m²
Width: 150 cm
Colour: transparent
2,92 EUR