Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 285 g/m² Carbon Fabric Twill | HP-T286/125C

Preview: Carbon Fabric 286 g/m² Twill | HP-T286C

285 g/m² Carbon Fabric Twill | HP-T286/125C

Mobile Preview: Carbon Fabric 286 g/m² Twill | HP-T286C

285 g/m² Carbon Fabric Twill | HP-T286/125C

Product No.:: HP-T286/125C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: 116 m²

Sliding scale prices

1-2,5 m²: per 41,50 EUR
3-4,5 m²: per 39,90 EUR
5-9,5 m²: per 37,96 EUR
10-24,5 m²: per 35,69 EUR
25-49,5 m²: per 33,92 EUR
50-124,5 m²: per 31,89 EUR
> 124,5 m²: per 29,69 EUR

41,50 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Twill | HP-T286C

Weight: 285 g/m²
Weave: Twill 4/4
Width: 125 cm

** IDEAL FOR COMPLEX GEOMETRIES **

Yarn type specifications:
Warp: 7 y/cm (3K 200Tex)

Weft: 7 y/cm (3K 200Tex)

Thickness: 0,43 mm
Yarn: 3K Mitsubishi Pyrofil

** The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls. **

Areas of application:

Modelling, sport equipment making, carbon design, motor sport, ship and boat construction, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 342 g/m²
Laminate thickness: 0,46 mm
Laminate weight: 627 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

300 g/m² Triaxial Carbonfabric | HP-T300C...

Construction:	+45°/-45°/0°
Fibre:	HT-Fibre
Weight:	300 g/m²
Width:	127 cm

on request

300 g/m² Bidiagonal Carbonfabric | HP-B305C...

Construction:	+/-45°
Fibre:	HT-Fibre
Weight:	300 g/m²
Width:	127 cm

18,85 EUR

Casting System - Epoxy Resin | HP-E45GA

Foundry patterns, die plates, reproduction patterns
Building small moulds and castings with slightly yellow colour
Encapsulation of decorative elements
Gevelling compound

from 11,50 EUR

Light stabilizer / Anti-yellowing additive...

BEL91 is added as light stabilizer into ready mixed systems
Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

Customers who bought this product bought also the following products:

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR