Subscribe to Newsletter

 
 
Connector reducing 12/10 mm | HP-VZ1090
Connector reducing 12/10 mm | HP-VZ1090
Connector reducing 12/10 mm | HP-VZ1090

Connector reducing 12/10 mm | HP-VZ1090

Product No.:
HP-VZ1090
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-4 Piece
per 4,17 EUR
5-9 Piece
per 3,76 EUR
10-24 Piece
per 3,34 EUR
> 24 Piece
per 3,13 EUR
4,17 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Connector reducing 12/10 mm (IQS-Standard) | HP-VZ1090

  • Push-in connector for easy connection
  • Different outside-diameter (reducing)
  • For tubes with a outside-diameter of 12/10 mm
 
Technical data:  
Material: Body plastic/nickel-plated brass
Seal: NBR (nitrile rubber)
Temperature range: 0 °C to max. +60 °C
Operating pressure: -0,95 to 10 bar

This product is compatible with (for example):

70 g/m² Vacuum Bagging Film (Width: 800 cm) | HP-VF70/800
70 g/m² Vacuum Bagging Film (Width: 800 cm)...
Material: PA / PE / PA
Weight: 70 g/m²
Width: 800 cm
Colour: Yellow, transparent
0,88 EUR
44 g/m² Perforated Release Film | HP-RF44/100
44 g/m² Perforated Release Film | HP-RF44/100...
Material: HDPE
Weight: 44 g/m²
Width: 100 cm
Colour: Blue,  transparent
3,27 EUR
500 ml plastic bottle with screw lid
500 ml plastic bottle | HP-L7025
  • Plastic bottle of HDPE natural
  • Volume: 500 ml
  • Incl. screw lid
1,40 EUR
1,40 EUR per pcs.
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 5,50 EUR

This product is similar to:

80 g/m² Glass Fabric "Finish" Plain
80 g/m² Glass Fabric "Finish" Plain | HP-U80EF...
Weight 0°:
80 g/m²
Total weight:
97 g/m²
Binding:
Plain
Width:
100 cm
Warp:
E-Glas EC9-68 Tex - 12Y/cm
Weft:
E-Glas EC9-34 Tex - 5Y/cm
Finish: 
6224 suitable for epoxy, UP, vinyl ester
7,24 EUR
Y-Connector 12/12/12 mm HP-VZ1130
Y-Connector 12/12/12 mm HP-VZ1130
  • Push-in Y-connector for easy connection
  • All sides of the same diameter
  • For tubes with a outside-diameter of 12 mm
6,53 EUR

Customers who bought this product bought also the following products:

MTI®-hose HP-MTI-08
MTI®-hose HP-MTI-08
The MTI® - hose is the new innovation in the branch of vacuum infusion. This new technology will provide more quality, less costs and better mechanical properties.
from 27,80 EUR
5,56 EUR per
MTI-Valve vacuum infusion | HP-VZ1450
MTI® VALVE automatic valve for vacuum infusion...
  • Regulates itself the infusion of resin
  • No resin pooling at inlet point
  • Fibres are evenly covered with resin
  • Homogeneous laminate
  • Optimum fibre volume ratio
  • Highest quality of parts with reproducible results
  • Working hours and its costs can be saved
4,64 EUR
Connector 10/10 mm | HP-VZ1050
Connector 10/10 mm | HP-VZ1050
  • Push-in connector for easy connection
  • Both sides of the same diameter
  • For tubes with a outside-diameter of 10 mm
3,87 EUR
Lock valve with push-in connector 10/10 mm | HP-VZ1140
Lock valve with push-in connector 10/10 mm...
  • Lock valve for control the airflow by evacuation
  • Both sides of the same diameter
  • For tubes with a outside-diameter of 10 mm
13,98 EUR