Thinner for PU-Coating | HP-IMC-X
Thinner for polyurethane varnish | HP-IMC-X
HP-IMC-X is a xylene based thinner for our In-Mould-Coating or other PU varnish. HP-IMC-X can be stired intensively in the mixed PU-system until the desired consistence is achieved.
Technical data:
|
Boiling point:
|
138°C
|
| Viscosity: | 1 mPas (20°C) |
|
Density:
|
0,9 g/mL (20°C)
|
Areas of applications:
Dissolver for cleaning applications, brush and equipment cleaner, ...
Processing guidelines
…As thinner / undercoating: HP-IMC-X can be stired intensively in the mixed PU-system until the desired consistence is achieved. Dosage depending on system and application between 10 - 40% (weight related).…As brush cleaner: Undiluted.
...As mould cleaner: Rub the mould with the help of cleaning rags. Let it air.
Properties and application notes:
- Neutral coloured
- High dissolving power
- Spray-thinner for In-Mould-Coating or other varnish based on PU
- Mould cleaner
Working notes and decision guidance
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Decision guidance epoxy resins (PDF)
If you need further working notes and decision guidance, you will find anything here in the download portal.
Hazard Statements
Thinner HP-IMC-X
H225 Highly flammable liquid and vapour.H319 + EUH066 Causes serious eye irritation. Repeated exposure may cause skin dryness or cracking.
H336 May cause drowsiness or dizziness.
May be fatal if swallowed and enters airways.
Harmful if inhaled.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
