Adhesive System - Epoxy Resin | HP-E60K
Epoxy Adhesive, performance bondings | Epoxy Resin HP-E60K
The Epoxy Adhesive HP-E60K is an unfilled combination of resin and hardener with processing time (pot life) of 60 minutes.
Features & Benefits
- Cold-hardening, medium viscous
- Production of high performance bondings
- Very good wet-out of substrate surfaces
- Free of solvents and filling agents, if required fillers can be added (for gap-fillings etc.)
- Bondings are resistant against oil, grease, moisture, diluted acid or lyes and several solvents
- They adhere metal, wood, rubber, ceramic, rigid foams and many plastics.
Product Properties Epoxy System HP-E60K
- Colouring: slightly yellow / clear
- Mixing ratio by weight (resin : hardener): 100 : 50
- Mixing ratio by volume (resin : hardener): 100 : 60
- Pot life time (at 25°C): 60 minutes
- Functional strength (100 g / 23°C): 16 h
- Processing temperature (minimum): 15°C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
