Subscribe to Newsletter

 
 
Radius roller | HP-DR
Radiuses roller | HP-DR
Radius roller | HP-DR

Radiuses roller | HP-DR

Product No.:
HP-DR-13X50
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
11,90 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Radius roller | HP-DR

Aluminium radius roller are used for compressing and ventin the laminates.

Suitable for curved and round surfaces

Available dimensions:
Item-No.: Diameter: Width:
HP-DR-13x50 13 mm 50 mm
HP-DR-25x75 25 mm 75 mm
 






Areas of applications and features:

  • High resistance to almost all cleansers
  • Aluminium roller with screw fastening incl. holder and plastic grip
  • The aluminium roller can be cleaned by burning off cured resin thus the life time will be extended

This product is compatible with (for example):

Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
  • Glow time: up to 10 hours, depending on the amount of light stored or light intensity
  • Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
  • Compatible with many basic materials 
  • Charging by: UV-radiation, daylight, artificial light and many more
from 9,98 EUR
Scissors "easypro" stainless steel | HP-L1055
Scissors "easypro" stainless steel | HP-L1055...
Length: 28 cm
Colour: Black / Red
6,37 EUR
Mould Covering Epoxy Resin HP-E30FB
Mould Covering System, black - Epoxy Resin...
The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time
from 28,90 EUR
Laminating Resin Epoxy HP-E28L
Laminating System - Epoxy Resin | HP-E28L...

The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR
15 mm Laminating brush | HP-L1107
15 mm Laminating brush | HP-L1107
Width: 15 mm
Bristle: Black China bristle
Stalk: Wood stalk
0,85 EUR

Customers who bought this product bought also the following products:

166 g/m² Glass Fabric "Silane" Twill | HP-T163E
166 g/m² Glass Fabric "Silane" Twill | HP-T163E...
Weight: 166 g/m²
Weave: Twill 2/2
Sizing: Silane
Width: 100 cm
5,25 EUR
Epoxy Covering Gelcoat System HP-E25DM
Covering System - Gelcoat - Epoxy Resin...
This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and medium viscosity.

Topcoat, 25 minutes working time
from 7,90 EUR
Laminating Resin Epoxy HP-E28L
Laminating System - Epoxy Resin | HP-E28L...

The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR