Main page » Tools / Accessories » Jerrycans » Plastic Bottles » 1000 ml plastic bottle | HP-L7035

1000 ml plastic bottle | HP-L7035

Mobile Preview: plastic bottles and jerry cans

1000 ml plastic bottle | HP-L7035

Product No.:: HP-L7035
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

Sliding scale prices

1-4 Piece: per 1,65 EUR (1,65 EUR per pcs.)
5-9 Piece: per 1,57 EUR (1,57 EUR per pcs.)
10-24 Piece: per 1,49 EUR (1,49 EUR per pcs.)
25-49 Piece: per 1,32 EUR (1,32 EUR per pcs.)
> 49 Piece: per 1,16 EUR (1,16 EUR per pcs.)

1,65 EUR
1,65 EUR per pcs.

incl. 19% tax excl. Shipping costs

Piece:

Description

Description

1000 ml plastic bottle | HP-L7035

Material: HDPE natural
Volume: 1000 ml
Colour: White

Areas of applications and features:

Plastic bottle of HDPE natural
Volume: 1000 ml
Incl. screw lid

This product is compatible with (for example):

Spray adhesive 400 ml | HP-FIX400

To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
Application in combination with the epoxy resins from HP-Textiles
Excellent spray control with adjustable spray button and dosage valve
Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials

11,84 EUR
11,84 EUR per pcs.

Infusion System - Epoxy Resin | HP-E300RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 300 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 56,50 EUR

145 g/m² Vaccum Mesh | HP-IM145-100

Material:	HDPE
Weight:	145 g/m²
Width:	100 cm

4,14 EUR

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

infusionsystem resin and hardener HP-E200GL

Infusion System -Epoxy Resin | HP-E200GL

The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,90 EUR

This product is similar to:

Drip Cap with Tip (2 pcs) | 1406

Colour: Nature
Thread: 28 mm
Suitable for plastic bottles from 250 ml up to 1 L
Set of 2 plastic valves

2,90 EUR

Customers who bought this product bought also the following products:

Carbon Fabric 160 g/m² Twill | HP-T240/125C

245 g/m² Carbon Fabric Twill | HP-T240/125C...

Weight:	245 g/m²
Weave:	Twill 2/2
Width:	125 cm

31,95 EUR

580 g/m² Glass Roving Fabric Twill | HP-T580E...

Weight:	580 g/m²
Weave:	Twill 2/2
Width:	130 cm

4,36 EUR

Spiral Tube for vacuum moulding | HP-ST080...

Material:	Polyethylen
Diameter:	8,00 mm

from 7,95 EUR

High-Gloss Release Agent | HP-HGR5

Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
Fast drying time (per layer <5 minutes at 20°C)
Semipermanent, external release agent with good demoulding features
Minimises remains on the moulds’ surface – and at the same time no transmission to the component

from 9,88 EUR