Main page » 200 g/m² Carbon Fabric Twill 2/2 Spread Tow | HP-T201SC

Preview: 160 g/m² Spread Tow Carbon Fabric Plain - 3K-Fibre | HP-P161SC

200 g/m² Carbon Fabric Twill 2/2 Spread Tow | HP-T201SC

Mobile Preview: 160 g/m² Spread Tow Carbon Fabric Plain - 3K-Fibre | HP-P161SC

200 g/m² Carbon Fabric Twill 2/2 Spread Tow | HP-T201SC

Product No.:: HP-T201SC
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: 271.5 m²

Sliding scale prices

1-2,5 m²: per 34,45 EUR
3-4,5 m²: per 32,73 EUR
5-9,5 m²: per 30,82 EUR
10-24,5 m²: per 28,92 EUR
25-49,5 m²: per 27,95 EUR
50-130,5 m²: per 26,42 EUR
> 130,5 m²: per 25,64 EUR

34,45 EUR

incl. 19% tax excl. Shipping costs

Description

200 g/m² Carbon Fabric Twill 2/2 Spread Tow | HP-T201SC

This Spread-Two-Carbon-Fabric is a fabric with a standard 3K spreaded fibres. It is very thin through the spreading of the single filaments but nevertheless is the fabric very closed. You achieve an increased strength and a lower resin consumption because of the low fibre bending. It is ideal for design applications because of its’ unique carbon look.

Construction: Twill 2/2

Weight: 200 g/m²

Width: 125 cm
Fibre: Spread Tow / approx 2 mm strand width

Fibre orientation:

Warp:	5 y./cm (3K 200 Tex / HT-Fibre)
Weft:	5 y./cm (3K 200 Tex / HT-Fibre)
Thickness:	0,32 mm
Yarn:	Hexcel AS4C-3K

Areas of application:

Design application, modelling, sports equipment, carbon design, motor sport, ...

► Laminate calculator
Here you can calculate specific values for your application.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Coating - Laminating System - 3.3kg - Epoxy...

The Epoxy Covering Resin System HP-E30TDS is an unfilled, thixotropic combination of resin and hardener with a medium working time (pot life). For high quality Pondbuilding Coverings.
Available in several colours or clear, adjustable with color paste HP-FP to RAL.

62,90 EUR
18,89 EUR per Kg

Nitril-gloves | HP-L1053

Size:	10
Norm:	EN 388 4121
Colour:	yellow

2,28 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Pigment paste opaque | FPN

Liquid Pigment pastes for colouring
Due to a high pigment concentration very efficient in consumption
Good colouring
Suitable for solvent free for epoxy resin and polyurethane systems

from 3,29 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

Customers who bought this product bought also the following products:

High-Gloss Release Agent Carnauba Wax Paste

High-Gloss Release Agent - 700g Carnauba...

Wax release agent for brilliant high glossy finish in moulds with smooth, non porous surfaces (metal, plastics, varnished wood or MDF)
Suitable for most composites mould applications with solvent free epoxy and polyester resins
Primer for film release agent HP-PVA
High-gloss release agent for working with In-Mould Coating HP-IMC (HP-Textiles)