Main page » Reinforcement Fabrics » Glass Filament Fabric Finish » Plain » 206 g/m² Glass Fabric "Finish" Plain | HP-P200/127EF

206 g/m² Glass Fabric "Finish" Plain | HP-P200/127EF

Name: 206 g/m² Glass Fabric "Finish" Plain | HP-P200/127EF
SKU: HP-P200/127EF
Price: 4.91 EUR
Availability: InStock

Product No.:: HP-P200/127EF
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,9 m²: per 4,91 EUR
3-4,9 m²: per 4,61 EUR
5-9,9 m²: per 4,30 EUR
10-24,9 m²: per 3,99 EUR
25-49,9 m²: per 3,68 EUR
50-126,9 m²: per 3,07 EUR
> 126,9 m²: per 2,61 EUR

4,91 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Glass Fiber Fabric Finish Plain | HP-P200/127EF

Weight: 206 g/m²
Weave: Plain
Sizing: Finish
Width: 127 cm

Yarn type specifications:
Warp: 17 y/cm (EC9-68 tex)

Weft: 11,8 y/cm (EC9-68 tex)

Areas of application:

Design of models-, sport equipment, boat-, tank- and mould construction, car-parts, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 169 g/m²
Laminate thickness: 0,23 mm
Laminate weight: 375 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

300 g/m² Glass fabric Bidiagonal | HP-B300E...

Construction:	+/-45°
Weight:	300 g/m²
Width:	127 cm

5,99 EUR

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

Mould Covering System - Epoxy Resin | HP-E25FB...

The Epoxy Resin System HP-E25FB is an unfilled, thixotropic 2-component combination of resin and hardener with high sanding anpolishing properties-

Mould covering system, 25 minutes working time

from 39,40 EUR

Digital Table Scale (all steel panel) 5Kg/1g | VZ3006

Digital Table Scale 5Kg/1g | HP-VZ3006

Strain Gauge Precision Technology
Capacity: up to 5kg
Readability: 1g
Display Modes: g / oz
Key with Full Function: ON/OFF/TARA/ZERO
Auto/Manual Shut-Off
Powered by AAA Battery (included)
Dimension (incl. weighing pan): 18 cm x 12 cm x 8 cm

16,65 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Customers who bought this product bought also the following products:

infusionsystem resin and hardener HP-E200GL

Infusion System -Epoxy Resin | HP-E200GL

The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,90 EUR

200 g/m² Carbon Fabric Twill | HP-T200C

Weight:	200 g/m²
Weave:	Twill 2/2
Width:	100 cm

27,89 EUR

215 g/m² Unidirectional Carbonfabric | HP-U215C...

Weight:	215 g/m²
Weave:	Plain
Width:	100 cm

19,40 EUR

High-Gloss Release Agent Carnauba Wax Paste

High-Gloss Release Agent - 700g Carnauba...

Wax release agent for brilliant high glossy finish in moulds with smooth, non porous surfaces (metal, plastics, varnished wood or MDF)
Suitable for most composites mould applications with solvent free epoxy and polyester resins
Primer for film release agent HP-PVA
High-gloss release agent for working with In-Mould Coating HP-IMC (HP-Textiles)

29,95 EUR
42,79 EUR per Kg