Subscribe to Newsletter

 
 
Carbon Fabric 160 g/m² Twill | HP-T240/050C
Carbon Fabric 160 g/m² Twill | HP-T240/050C
Preview: Carbon Fabric 160 g/m² Twill | HP-T240/050C
Preview: Carbon Fabric 160 g/m² Twill | HP-T240/050C
50cm - 245 g/m² Carbon Fabric Twill (Width: 50 cm) | HP-T240/050C
Carbon Fabric 160 g/m² Twill | HP-T240/050C
Carbon Fabric 160 g/m² Twill | HP-T240/050C
Mobile Preview: Carbon Fabric 160 g/m² Twill | HP-T240/050C
Mobile Preview: Carbon Fabric 160 g/m² Twill | HP-T240/050C

50cm - 245 g/m² Carbon Fabric Twill (Width: 50 cm) | HP-T240/050C

Product No.:
HP-T240/050C
ca. 1-3 days ca. 1-3 days (abroad may vary)
Stock:
140 m²
Sliding scale prices
1-2,5 m²
per 33,69 EUR
3-4,5 m²
per 31,95 EUR
5-9,5 m²
per 29,95 EUR
10-24,5 m²
per 28,50 EUR
25-49,5 m²
per 26,60 EUR
50-99,5 m²
per 24,95 EUR
> 99,5 m²
per 23,95 EUR
33,69 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Carbon Fiber Fabric Twill | HP-T240/050C

Weight: 245 g/m²
Weave: Twill 2/2
Width: 50 cm
 
Yarn type specifications:
Warp: 6 y/cm (3K  200Tex)
Weft: 6 y/cm (3K  200Tex)
Thickness: 0,35 mm
 
Technical Data Sheet Carbon Fabric HP-T240/050C
 
Areas of application: 
Modelling, sport equipment making, ship and boat construction, motor sport, aircraft construction, ...
 
Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 288 g/m²
Laminate thickness: 0,39 mm
Laminate weight: 528 g/m²

** The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls. **

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

 

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:
 
Plain
  • The simplest weave
  • Very slip-resistant
  • Bad drapability
  • Suitable for flat plates or easy moulds

Twill
  • Diagonally running lines are characteristic
  • Better drapability than plain weave
  • Less slip-resistant
  • Suitable for complicated geometries

Satin
  • Suitable for complicated geometries
  • Very good drapability
  • Low slip-resistance
  • Less mesh crossing, therefore strength in the laminate
  • Leaves a very smooth surface
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

300 g/m² Triaxial Carbonfabric | HP-T300C
300 g/m² Triaxial Carbonfabric | HP-T300C...
Construction: +45°/-45°/0°
Fibre: HT-Fibre
Weight: 300 g/m²
Width: 127 cm
on request
Covering System Epoxy HP-E25D
Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR
Epoxy Covering Gelcoat System HP-E25DM
Covering System - Gelcoat - Epoxy Resin...
This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and medium viscosity.

Topcoat, 25 minutes working time
from 7,90 EUR
Stirrer 20cm plastic
20 cm plastic Stirrer | HP-L1120
Colour: Red
Material: Plastic
Size: 20 cm incl hole and retaining hooks
0,83 EUR
15 mm Laminating brush | HP-L1107
15 mm Laminating brush | HP-L1107
Width: 15 mm
Bristle: Black China bristle
Stalk: Wood stalk
0,85 EUR

Customers who bought this product bought also the following products:

Multi-Purpose System Epoxy HP-E45KL
Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR
Bubble-free - Atomizer | HP-BEL61
Bubble-free - Atomizer | HP-BEL61
  • BEL61 is used for the destruction of gas bubbles
  • Finest atomization, 1000 sprays per 100 ml container
The BEL61 is a liquid used to destroy surface bubbles in casting resins or epoxi coatings.
6,90 EUR
6,90 EUR per 100 ml
Spray adhesive 400 ml | HP-FIX400
Spray adhesive 400 ml | HP-FIX400
  • To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
  • Application in combination with the epoxy resins from HP-Textiles
  • Excellent spray control with adjustable spray button and dosage valve
  • Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials
11,84 EUR
11,84 EUR per pcs.
83 g/m² Peel Ply Plain (Width: 60 cm) | HP-P83P60
83 g/m² Peel Ply Plain (Width: 60 cm) | HP-P83P60...
Weight: 83 g/m²
Weave: Plain
Width: 60 cm
Material: Nylon 6.6
3,75 EUR