Main page » Reinforcement Fabrics » Glass Filament Fabric Finish » Satin » 300 g/m² Glass Fabric "Finish" Satin | HP-S300EF

300 g/m² Glass Fabric "Finish" Satin | HP-S300EF

Name: 300 g/m² Glass Fabric "Finish" Satin | HP-S300EF
SKU: HP-S300EF
Price: 10.59 EUR
Availability: InStock

Product No.:: HP-S300EF
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,9 m²: per 10,59 EUR
3-4,9 m²: per 9,94 EUR
5-9,9 m²: per 9,59 EUR
10-24,9 m²: per 8,96 EUR
25-49,9 m²: per 8,33 EUR
50-99,9 m²: per 7,82 EUR
> 99,9 m²: per 6,99 EUR

10,59 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Glass Fiber Fabric Finish Satin | HP-S300EF

Weight: 300 g/m²
Weave: Satin8
Sizing: Finish
Width: 127 cm

Yarn type specifications:
Warp: 22 y/cm (EC9-68 tex)

Weft: 21,4 y/cm (EC9-68 tex)

Areas of application:

Sport equipment, design of models-, boat-, tank- and mould construction, car-parts ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 250 g/m²
Laminate thickness: 0,33 mm
Laminate weight: 550 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

300 g/m² Glass fabric Bidiagonal | HP-B300E...

Construction:	+/-45°
Weight:	300 g/m²
Width:	127 cm

5,99 EUR

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR

Epoxy resin system aquariums and terrariums HP-E45TM

Aquarium & Humid Terrarium - medium viscosity...

Our Epoxy Resin System E45TM has a medium viscosity and is specially designed for the use in aquariums and terrariums.

Medium viscosity for smooth or non-porous subsoil (Styrofoam, ...)

from 13,50 EUR

Corrosion protection - epoxy resin system

2 kg Epoxy corrosion prevention | HP-E40KS...

2-component epoxy corrosion prevention
Medium working time
Very good adhesion properties
Protection barrier against wetness and other influences

47,48 EUR
23,74 EUR per Kg

Casting System - Epoxy Resin | HP-E400GB

The Epoxy-System E400GB is an unfilled, low-viscosity combination of resin and hardener with a long working time (pot life).
Usable for epoxy casting of medium thickness (up to approx. 10cm* depending on surface, temperature geometries and casting quantity (volume) - further information: technical data sheet).

Transparent, clear

on request

20 cm plastic Stirrer | HP-L1120

Colour:	Red
Material:	Plastic
Size:	20 cm incl hole and retaining hooks

0,83 EUR

This product is similar to:

320 g/m² Glass fabric Bidiagonal | HP-B320/635E...

Construction:	+/-45°
Weight:	320 g/m²
Width:	63 cm

3,77 EUR

320 g/m² Glass fabric Bidiagonal | HP-B320E...

Complete rolls of 63,5 m²

Per roll:	63,5 m²
Construction:	Bidiagonal +/-45°
Weight:	320 g/m²
Width:	127 cm

2,09 EUR

320 g/m² Glass fabric Bidiagonal | HP-B320/635E...

Complete rolls of 63 m²

Per roll:	63 m²
Construction:	Bidiagonal +/-45°
Weight:	320 g/m²
Width:	63 cm

2,09 EUR

300 g/m² Glass fabric Bidiagonal | HP-B300E...

Construction:	+/-45°
Weight:	300 g/m²
Width:	127 cm

5,99 EUR

Customers who bought this product bought also the following products:

Adhesive System - Epoxy Resin | HP-E5K

The Epoxy Adhesive System HP-E5K is an unfilled, medium-viscosity combination of resin and hardener with fast reaction time.

Processing time of 5 minutes, applicable from 5°C

from 9,90 EUR

Carbon braided Sleeve 1K (D= 9,5 mm at 45°)...

Material:	1K 67tex (HT-Fibre)
Number of ends:	40
Diameter at 45°:	9,5 mm
Area of applications:	4 - 13 mm

**Offered and sold in stretched condition!**

5,88 EUR

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.