Subscribe to Newsletter

 
 
Carbon Fabric 400g/m² Plain
Carbon Fiber Fabric Plain | HP-P400C
Preview: Carbon Fabric 400g/m² Plain
Preview: Carbon Fiber Fabric Plain | HP-P400C
Carbon Fiber Fabric Plain | HP-P400C
Carbon Fabric 400g/m² Plain
Carbon Fiber Fabric Plain | HP-P400C
Mobile Preview: Carbon Fabric 400g/m² Plain
Mobile Preview: Carbon Fiber Fabric Plain | HP-P400C

Carbon Fiber Fabric Plain | HP-P400C

Product No.:
HP-P400C
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-2,5 m²
per 31,89 EUR
3-4,5 m²
per 29,95 EUR
5-9,5 m²
per 28,50 EUR
10-24,5 m²
per 26,78 EUR
25-49,5 m²
per 24,95 EUR
50-99,5 m²
per 23,68 EUR
> 99,5 m²
per 22,25 EUR
31,89 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Carbon Fiber Fabric Plain | HP-P400C

Weight: 400 g/m²
Weave: Plain
Width: 100 cm
 
Yarn type specifications:
Warp: 2,5 y/cm (12K  800Tex)
Weft: 2,5 y/cm (12K  800Tex)
Thickness: 0,64 mm
 
Technical Data Sheet Carbon Fabric HP-P200C
 
Areas of application: 
Ship and boat construction, motor sport, aircraft construction, ...
 
Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 480 g/m²
Laminate thickness: 0,64 mm
Laminate weight: 880 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

** The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls. **
Working Notes & Support

Working Notes:
In this instructions you will find tips & tricks to produce carbon-design parts and for boat building:
Carbon Coating (PDF)
Boat Buidling (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

 

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:
 
Plain
  • The simplest weave
  • Very slip-resistant
  • Bad drapability
  • Suitable for flat plates or easy moulds

Twill
  • Diagonally running lines are characteristic
  • Better drapability than plain weave
  • Less slip-resistant
  • Suitable for complicated geometries

Satin
  • Suitable for complicated geometries
  • Very good drapability
  • Low slip-resistance
  • Less mesh crossing, therefore strength in the laminate
  • Leaves a very smooth surface

This product is compatible with (for example):

410 g/m² Bidiagonal Carbonfabric | HP-B415C
410 g/m² Bidiagonal Carbonfabric | HP-B415C...
Construction: +/-45°
Fibre: HT-Fibre
Weight: 410 g/m²
Width: 127 cm
22,97 EUR
High performance laminating system HP-E29L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR
Covering Colour Pigments
Covering Colour Pigments | FD
The opaque colour pigments of the HP-FD series are used for colouring layers (gel and topcoats). They are suitable for laminating and casting resins.

Suitable for unsaturated polyester resins, epoxy resins, vinylester, polyurethan.
from 2,90 EUR
Acetone cleaning and degreasing agent
Cleaning and degreasing agent - Acetone...

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).  

Cleaning and degreasing agent

from 9,90 EUR
Plastic bottle 100 ml
100 ml plastic bottle | HP-L7005
  • Plastic bottle of HDPE natural
  • Incl. screw lid
  • Volume: 100 ml
1,15 EUR
1,15 EUR per pcs.

This product is similar to:

405 g/m² Designed Carbon Fabric "red magic carbon" | HP-T405CER
TOP
405 g/m² Designed Carbon Fabric "red magic...
Construction: Twill
Weight: 405 g/m²
Width: 125 cm
Colour: Red
70,81 EUR
405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
TOP
405 g/m² Designed Carbon Fabric "blue magic...
Construction: Twill
Weight: 405 g/m²
Width: 100 cm
Colour: Blue magic carbon
81,40 EUR

Customers who bought this product bought also the following products:

High performance laminating system HP-E29L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR
105 g/m² Peel Ply Twill (Breite: 125 cm) | HP-T105P125
105 g/m² Peel Ply Twill (Breite: 125 cm)...
Weight: 105 g/m²
Weave: Twill
Width: 125 cm
Material: Nylon 6.6
4,17 EUR
213 g/m² Glass Fabric "Silane" Twill | HP-T211E
213 g/m² Glass Fabric "Silane" Twill | HP-T211E...
Weight: 213 g/m²
Weave: Twill 3/1
Sizing: Silane
Width: 120 cm
6,83 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR