Subscribe to Newsletter

 
 
405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
Preview: 405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
Preview: 405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
Mobile Preview: 405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
Mobile Preview: 405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB
TOP

405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB

Product No.:
HP-T405CEB
ca. 1-3 days ca. 1-3 days (abroad may vary)
Stock:
56.5 m²
Minimum order:
0,5
Sliding scale prices
1-2,5 m²
per 81,40 EUR
3-4,5 m²
per 78,90 EUR
5-9,5 m²
per 76,10 EUR
10-24,5 m²
per 73,72 EUR
25-49,5 m²
per 71,22 EUR
> 49,5 m²
per 68,66 EUR
81,40 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

405 g/m² Designed Carbon Fabric "blue magic carbon" | HP-T405CEB

With the "blue magic carbon" you get unique and very fascinating coated surface. Three-dimensional carbon fiber optics paired with fine red Design. Because of the dense interweaving it is relatively slip resistant, has good draping and cuddly. Thus, it is not only suitable for flat components, but also for more complex curves and shapes.

Construction: Twill
Weight: 405 g/m²
Width: 100 cm
Colour: Blue magic carbon
 
Fibre orientation:
18 y/cm 
(3K Carbon 200Tex / 136Tex Glas EC9)
Warp:
6 y/cm (3K  Carbon 200Tex)
Weft:
18 y/cm (3K Carbon 200Tex / 136Tex Glas EC9)
Thickness:
0,55 mm
 
Technical Data Sheet Carbon Fabric HP-P200C
Areas of application: 
Interior decoration, hoods, air filter cover, sports equipment, skis, snowboards, bicycle components, safety helmets, furniture, body parts, ...

► Laminate calculator
Here you can calculate specific values for your application.
Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Covering System Epoxy HP-E25D
Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR
Carbon Fabric 400g/m² Plain
Carbon Fiber Fabric Plain | HP-P400C
Weight: 400 g/m²
Weave: Plain
Width: 100 cm
31,89 EUR
Epoxy Covering Gelcoat System HP-E25DM
Covering System - Gelcoat - Epoxy Resin...
This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and medium viscosity.

Topcoat, 25 minutes working time
from 7,90 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR
Epoxy Covering System
Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR

This product is similar to:

Casting System - Epoxy Resin | HP-E45GA
TOP
Casting System - Epoxy Resin | HP-E45GA
  • Foundry patterns, die plates, reproduction patterns
  • Building small moulds and castings with slightly yellow colour
  • Encapsulation of decorative elements
  • Gevelling compound
from 11,50 EUR
Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LS
Polyester resin based on ISO NPG -Resin...
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
from 40,41 EUR
High performance laminating system HP-E29L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR
Laminating Resin Epoxy HP-E28L
Laminating System - Epoxy Resin | HP-E110L...

The Epoxy-System HP-E110L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 110 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR

Customers who bought this product bought also the following products:

105 g/m² Peel Ply Twill | HP-T105P100
105 g/m² Peel Ply Twill | HP-T105P100
Weight: 105 g/m²
Weave: Twill
Width: 100 cm
Material: Nylon 6.6
4,17 EUR
Carbon Fabric 200 g/m² Twill | HP-T200C
200 g/m² Carbon Fabric Twill | HP-T200C
Weight: 200 g/m²
Weave: Twill 2/2
Width: 100 cm
27,89 EUR
Acetone cleaning and degreasing agent
Cleaning and degreasing agent - Acetone...

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).  

Cleaning and degreasing agent

from 9,90 EUR
Carbon braided Sleeve 6K (D= 18 mm at 45°) | HP-BSC018/32/6
Carbon braided Sleeve 6K (D= 18 mm at 45°)...
Material: 6K 400tex (HT-Fibre)
Number of ends: 32
Diameter at 45°: 18 mm
Area of applications: 7 - 24  mm

**Offered and sold in stretched condition!**
4,35 EUR