Epoxy resin electronic-casting compound | BM-E45GE
Epoxy resin electronic-casting compound | BM-E45GE
The epoxy resin system E45GE is an unfilled, low viscous 2-component combination of resin and hardener with a working time of approx. 45 min. Applicable for casting applications in electronic.
Properties and field of application:
- For introducing electric circuits / connections, Casting compound for electrical applications up to 50 V (~/AC) / 120 V (=/DC) (SELV low voltage)*
- Excellent casting properties
- Transparent, sticky-free surfaces
- Good light stability
- High impact resistance
- Low exothermy
* Use as electrical potting compound only when unfilled. The determined values prove the fundamental. Electrical insulation effect, for the specific application, the collection of further data is necessary. Further details and the test report from the Fraunhofer Institute can be found in the product data sheet
Note:
Only apply as electro cast in unfilled conditions!
Technical Data epoxy resin E45GE
- Working time: 45 min
- Colour: transparent / clear
- Mixing ratio (weight): 100 parts resin / 60 parts hardener
- Mixing viscosity: low viscous (thin)
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
