High Performance Laminating System - Epoxy Resin | HP-E29L
High Performance Laminating Resin, Better Properties | Epoxy Resin HP-E29L
The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
Features & Benefits
- Very good wetting properties of the reinforcing fibres
- Cold setting, de-mouldable at room temperature
- Free of solvents and fillers
- Improved physiological compatibility (no R62 labelling)
- Practically shrink-free curing
- Temperature resistance (Tg Max) up to 93°C
- Free of Nonylphenol and DETA
- Special formulation supports faster curing and increased strength, especially at higher temperatures
- Individual colouring is available upon request
- Excellent adhesion to the In-Mould Coating of HP-Textiles
- In total better characteristic values of approx. 10% (Tg MAX, tensile strength etc.) than those of standard systems!
As impregnating and laminating resins in the areas of:
- Mould-making and fixture construction, Industrial parts
- Construction of sports equipment, model making
- Orthopaedic
- Vehicle substructures / motorsport
- Boat construction
- Aircraft construction (ultralight aviation)
- ...
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping.
A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping.
A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Product Properties Epoxy System HP-E29L
- Colouring: Slightly bluish / green
- Mixing Ratio (by weight): 100 parts resin : 40 parts hardener
- Mixing Ratio (by volume): 100 parts resin : 44 parts hardener
- Mixed Viscosity: low viscous
- Working Time (pot life): 25 minutes (100 g at 20 °C)
- Working temperature (optimum): 15 - 25 °C
- Working temperature (minimum): 15 °C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin: Safety data sheet (PDF)
Danger
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H360F May damage fertility.
H411 Toxic to aquatic life with long lasting effects.
Hardener: Safety data sheet (PDF)
Danger
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
Shipping Terms
National (Germany):
- No shipping to private customers.
- Sale exclusively to business customers, if:
- the product is used for one of the purposes listed below and
- this is confirmed during the ordering process via checkbox.
International:
- Shipping available to all customers (private or commercial) without additional confirmation.
Chemicals Ban Ordinance (ChemVerbotsV) Declaration
According to the Chemicals Ban Ordinance (ChemVerbotsV), we can only sell this product to individuals over the age of 18, if one of the following uses applies:
- Professional Use:
Use within the framework of a registered, ongoing commercial activity that involves processing such substances. - Public Institutions:
Research, analysis, education, or teaching at public research or educational institutions. - Resale:
Compliance with §6 of the ChemVerbotsV is hereby confirmed.
➔ A copy of the proof of expertise according to §11 ChemVerbotsV must be submitted via email after the order.
Mandatory Confirmation During the Ordering Process
By selecting the checkbox(es) during the ordering process, you confirm:
- You are authorized to purchase the product in accordance with the current ChemVerbotsV.
- You will use the product exclusively:
- in accordance with the corresponding product and safety data sheets,
- and for one of the above-mentioned purposes.
- You will comply with all applicable regulations when handling and processing the product.
Notes & Legal Declaration
- I/we confirm compliance with all applicable chemical regulations (especially the ChemVerbotsV).
- The required product and safety information (e.g. in the "Hazard Statements" tab) are available and have been acknowledged.
- False statements may have legal consequences.
- This confirmation may be submitted to the responsible authority upon request.
- Any changes to my/our purchasing status will be communicated to HP-Textiles GmbH without delay.
- This declaration is valid until revoked.
.jpg "Preview: 194 g/m² Unidirectional 0° carbon fabric 12K HT fiber spread | SP-U194C")
