Clear coat glossy 400 ml | HP-KL500G
Clear coat glossy 400 ml | HP-KL500G
*** New in our assortment!!! / 20% introductory discount!!! ***
The 1K-Clearcoat Series HP-KL500 are transparent, universally applicable, quick-drying clearcoats for many areas of application. These systems are an ideal protective coating for metal and wood surfaces as well as for paintable plastics. The treated surfaces are protected and refined by the coating, which also gives them a like-new appearance. The clearcoat HP-KL500G is colorless glossy. If you are looking for an alternative matte clearcoat, you can find it here.
The 1K-Clearcoat Series HP-KL500 are transparent, universally applicable, quick-drying clearcoats for many areas of application. These systems are an ideal protective coating for metal and wood surfaces as well as for paintable plastics. The treated surfaces are protected and refined by the coating, which also gives them a like-new appearance. The clearcoat HP-KL500G is colorless glossy. If you are looking for an alternative matte clearcoat, you can find it here.
Technical data:
| Content: | 400 ml |
| Color: | colorless glossy |
| Drying times at 20 °C | |
| Dust dry: | after approx. 5 - 10 min |
| Touch dry: | after approx. 25 - 30 min |
| Fully cured: | after approx. 120 min |
Areas of applications:
Protective coating for metal and wood surfaces, paintable plastics, epoxy resin surfaces and castings, ...
Properties and application notes:
- Adheres to almost all solid surfaces.
- Colorless finish in glossy.
- Non-yellowing and lightfast with very good flow properties.
- Ideal for epoxy resin surfaces and castings.
- Protects against corrosion and UV light. Facilitates later cleaning.
- The coating film increases surface smoothness and results in a colorless, scratch-resistant surface.
- Spray nozzle adjustable vertically or horizontally depending on the application.
Working notes:
Bring the can of clear lacquer to room temperature before use and shake vigorously for 1 - 2 minutes. Then spray on several thin coats at a distance of approx. 25 - 30 cm. Allow 3 - 5 minutes flash-off time between spraying. Only spray at +10°C, in dry weather, in areas protected from the wind or in well-ventilated rooms. The paint is dry after approx. 25 - 30 minutes. After use, turn the spray can upside down and spray the can empty to prevent the clear lacquer from drying in the nozzle head.
Hazard Statements
Caution
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335-H336 May cause respiratory irritation. May cause drowsiness or dizziness.
H373 May cause damage to the hearing organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long lasting effects.
.jpg "Preview: 30 g/m² Perforated Release Film | HP-RF30/130")
.JPG "Preview: 30 g/m² Perforated Release Film | HP-RF30/130")
.JPG "Preview: 30 g/m² Perforated Release Film | HP-RF30/130")
