Main page » Dye » Dye covering » Pigment paste opaque | FPN

Pigment paste opaque | FPN

Pigment paste opaque | FPN

Product No.:: BM-FPN-S-05
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

Color:

Quantity:

20,95 EUR
41,90 EUR per Kg

incl. 19% tax excl. Shipping costs

Piece:

Description

Description

Pigment paste (liquid) | FPN

The opaque pigment pastes consist of high quality pigments, oil and certain tensides. The pigment pastes are free of solvents and volatile organic compounds. The pigment pastes are used for colouring of coatings.

Properties and fields of application:

Suitable for colouring solvent free epoxy resin and polyurethane systems
Due to its high pigment concentration very economical in consumption
good colour fidelity and reproducibility
Good colouring

Mixing ratio (guide formulation):

Coatings	10 - 15 % (by weight)
Top coat systems	5 - 10 % (by weight)
Casting and laminate resin	1 - 5 % (by weight)

This product is compatible with (for example):

28 cm plastic Stirrer | HP-L1128

Colour:	Black
Material:	Plastic
Size:	28 cm incl hole and retaining hooks

0,95 EUR

Casting system resin transparent HP-E50GB

Casting System (transparent) - Epoxy Resin...

Transparent, low shrink-casting with tacky-free surfaces
Very good flow behaviour (low-viscosity)
Cold-hardening, demouldable at room-temperature
High fillable casting resin
Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR

Light stabilizer / Anti-yellowing additive...

BEL91 is added as light stabilizer into ready mixed systems
Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR

20 cm plastic Stirrer | HP-L1120

Colour:	Red
Material:	Plastic
Size:	20 cm incl hole and retaining hooks

0,83 EUR

49 g/m² Glass Fabric "Finish" Plain | HP-P49EF...

Weight:	49 g/m²
Weave:	Plain
Sizing:	Finish
Width:	127 cm

4,19 EUR

This product is similar to:

Infusion System - Epoxy - Resin component...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 40,50 EUR

160 g/m² Spread Tow Carbon Fabric Plain...

Construction:	Plain
Weight:	160 g/m²
Width:	125 cm

Spread Tow, strand width approx 2,5 mm

38,95 EUR

80 g/m² Carbon Fabric Plain | HP-P80C

Weight:	80 g/m²
Weave:	Plain
Width:	100 cm

79,98 EUR

200 g/m² Carbon Fabric Twill 2/2 Spread Tow...

Construction:	Twill 2/2
Weight:	200 g/m²
Width:	125 cm

Spread Tow, strand width approx 2 mm

34,45 EUR

Customers who bought this product bought also the following products:

100g/m² Bidiagonal carbon fabric with black...

Construction:	+/-45°
Fibre:	Toray
Weight:	100 g/m²
Width:	127 cm

27,97 EUR

Drip Cap with Tip (2 pcs) | 1406

Colour: Nature
Thread: 28 mm
Suitable for plastic bottles from 250 ml up to 1 L
Set of 2 plastic valves

2,90 EUR

Silicone rubber | HP-SI30GB

Medium viscous mould making
High tear strength
Working time 30 minutes
Smooth cast without air bubble

from 20,90 EUR

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR