Main page » Dye » Dye transparent » Set of 7 x 20 ml Transparent colourant (liquid) | FTP-SET

Set of 7 x 20 ml Transparent colourant (liquid) | FTP-SET

Mobile Preview: transparent colourant | FTP

Set of 7 x 20 ml Transparent colourant (liquid) | FTP-SET

Product No.:: BM-FTP-SET-01
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

18,90 EUR
0,14 EUR per ml

incl. 19% tax excl. Shipping costs

Piece:

Description

Description

Set of 7x20 ml transparent colourant (liquid) | FTP-SET

High concentrated, transparent colouring, easy doseable liquid with useful dropping cap.

Properties and field of applications:

Set consists of 7 x 20 ml tubes
Liquid colourant for transparent colouring
Due to high colourant concentration very economical in consumption
Good colouring
Suitable for transparent resin systems
Added quantity depends on desired colour intensity

Set consists of 7 x 20 ml
Pink, sunny yellow, blue, brown, red, turquoise-bright, red-purple

This product is compatible with (for example):

28 cm plastic Stirrer | HP-L1128

Colour:	Black
Material:	Plastic
Size:	28 cm incl hole and retaining hooks

0,95 EUR

Light stabilizer / Anti-yellowing additive...

BEL91 is added as light stabilizer into ready mixed systems
Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR

Casting system resin transparent HP-E50GB

Casting System (transparent) - Epoxy Resin...

Transparent, low shrink-casting with tacky-free surfaces
Very good flow behaviour (low-viscosity)
Cold-hardening, demouldable at room-temperature
High fillable casting resin
Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR

Casting System - Epoxy Resin | HP-E300GB

The Epoxy-System E300GB is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) more than 300 minutes. Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume).

Transparent, clear

from 25,90 EUR

Nitril-gloves | HP-L1053

Size:	10
Norm:	EN 388 4121
Colour:	yellow

2,28 EUR

Customers who bought this product bought also the following products:

Silicone rubber | HP-SI30GB

Medium viscous mould making
High tear strength
Working time 30 minutes
Smooth cast without air bubble

from 20,90 EUR

Spray adhesive 400 ml | HP-FIX400

To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
Application in combination with the epoxy resins from HP-Textiles
Excellent spray control with adjustable spray button and dosage valve
Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials

11,84 EUR
11,84 EUR per pcs.

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

Thixotropic for silicone SI30GB | SI-VD

Excellent thickening effect for SI30GB
Solvent-free
Dilution of condensation and additioncuring RTV-2 silicone systems
Optimization of the gradient properties

from 14,90 EUR