Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 193 g/m² Spread Tow Carbon Fabric Twill | HP-T193C

Preview: 193 g/m² Spread Tow Carbon Fabric Twill 2/2 | HP-T193C

Preview: Spread Tow Carbon Fabric Twill 2/2 | HP-T193C

Preview: Carbon Fabric Spread Tow | HP-T193C

193 g/m² Spread Tow Carbon Fabric Twill | HP-T193C

Mobile Preview: 193 g/m² Spread Tow Carbon Fabric Twill 2/2 | HP-T193C

Mobile Preview: Spread Tow Carbon Fabric Twill 2/2 | HP-T193C

Mobile Preview: Carbon Fabric Spread Tow | HP-T193C

193 g/m² Spread Tow Carbon Fabric Twill | HP-T193C

Product No.:: HP-T193C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: 7 m²

Sliding scale prices

1-2,5 m²: per 39,15 EUR
3-4,5 m²: per 36,77 EUR
5-9,5 m²: per 34,99 EUR
10-24,5 m²: per 32,96 EUR
25-49,5 m²: per 30,88 EUR
50-132,5 m²: per 28,86 EUR
> 132,5 m²: per 27,79 EUR

39,15 EUR

incl. 19% tax excl. Shipping costs

Description

193 g/m² Spread Tow Carbon Fabric Twill 2/2 | HP-T193C

The Spread-Two-Carbon-Fabric is a fabric with spreaded fibres. It is very thin through the spreading of the single filaments but nevertheless is the fabric very closed. You achieve an increased strength and a lower resin consumption because of the low fibre bending. It is ideal for design applications because of its’ unique carbon look.

Construction: Twill 2/2
Weight: 193 g/m²
Width: 127 cm
Fibre: Spread Tow / approx 8,3 mm strand width

Fibre orientation:

Warp:	1,2 y./cm (12K HT-Fibre)
Weft:	1,2 y./cm (12K HT-Fibre)
Thickness:	0,20 mm

Areas of application:

Design application, modelling, sports equipment, carbon design, motor sport, ...

► Laminate calculator
Here you can calculate specific values for your application.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

217 g/m² Bidiagonal carbon fabric 12K Toray...

Construction:	+/-45°
Fibre:	HT-Faser
Weight:	217 g/m²
Width:	94,50 cm

instead 28,50 EUR
only 14,25 EUR
You save 50%

Laminating System - Epoxy Resin | HP-E55L...

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR

Scissors "easypro" stainless steel | HP-L1055...

Length:	28 cm
Colour:	Black / Red

6,37 EUR

Casting system resin transparent HP-E50GB

Casting System (transparent) - Epoxy Resin...

Transparent, low shrink-casting with tacky-free surfaces
Very good flow behaviour (low-viscosity)
Cold-hardening, demouldable at room-temperature
High fillable casting resin
Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR

Radius roller | HP-RR

Aluminium radius roller are used for compressing and ventin the laminates with screw fastening incl. holder and plastic grip.

Suitable for glass fabrics

Available dimensions:
Item-No.:	Diameter:	Width:
HP-RR-13x75	13 mm	75 mm
HP-RR-25x75	25 mm	75 mm
HP-RR-25x150	25 mm	150 mm
HP-RR-50x75	50 mm	75 mm
HP-RR-50x150	50 mm	150 mm

from 9,90 EUR

This product is similar to:

Coating - Laminating System - 1.5kg - Epoxy...

The Epoxy Covering Resin System HP-E30TDS is an unfilled, thixotropic combination of resin and hardener with a medium working time (pot life). For high quality Pondbuilding Coverings.
Available in several colours or clear, adjustable with color paste HP-FP to RAL.

36,90 EUR
24,60 EUR per Kg

7 Rotary Burrs - COARSE - Perma-Grit® | HP-KT1...

Unlike conventional Needle Files Perma-Grit® files cut in any direction, and will cut Plastics, Plywood, Balsa, GRP, Carbon fibre. Perfect for small detail work in confined areas, robust long life files.

from 15,90 EUR

100 g/m² Unidirectional Carbonfabric | HP-U100/50C

200 g/m² Unidirectional Carbonfabric | HP-U200/50C...

Construction:	0°
Fibre:	HT-Fibre
Weight:	200 g/m²
Width:	50 cm

18,98 EUR

Priming Wax | HP-G

Wax primer for barely wettable and porous surfacesHighly effective
Flowable and silicon free wax
Foundation for Film Release Agent HP-PVA
Good release properties
Drying time approx. 5-15 minutes

from 13,50 EUR

Customers who bought this product bought also the following products:

Epoxy resin multi-purpose system for laminating, gluing and many other applications

Epoxy Resin multi-purpose system 25 min...

The Epoxy-System HP-E25KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with short working time (pot life). It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould making, Applicable from 5°C temperature

from 6,90 EUR