Main page » Epoxy Resin » Adhesive / Epoxy Glue » Adhesive / Epoxy glue » 5 minutes » Adhesive System in a double syringe - Epoxy Resin | HP-E5K

Adhesive System in a double syringe - Epoxy Resin | HP-E5K

TOP

Adhesive System in a double syringe - Epoxy Resin | HP-E5K

Product No.:: HP-E5K-0029
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

Sliding scale prices

1-4 Piece: per 8,50 EUR (0,29 EUR per g)
5-9 Piece: per 8,07 EUR (0,28 EUR per g)
10-24 Piece: per 7,65 EUR (0,26 EUR per g)
25-49 Piece: per 6,80 EUR (0,23 EUR per g)
> 49 Piece: per 5,95 EUR (0,21 EUR per g)

8,50 EUR
0,29 EUR per g

incl. 19% tax excl. Shipping costs

Piece:

Description

Double Syringe, Epoxy Adhesive | Epoxy Resin HP-E5K

The epoxy resin HP-E5K is an user-friendly fast-setting epoxy glue with a processing time (pot life) of 5 minutes.

Delivery includes:
- 5 minutes-epoxy glue in a double syringe (29g)
- 1x mixing tube / HP-L4002

Features & Benefits

Cold-hardening, medium viscous, applicable from 5°C
Production of high performance bondings
Very good wet-out of substrate surfaces
Free of solvents and filling agents, if required fillers can be added (for gap-fillings etc.)
Bondings are resistant against oil, grease, moisture, diluted acid or lyes and several solvents
They adhere metal, wood, rubber, ceramic, rigid foams and many plastics.

Epoxy adhesives do not give off volatile components and therefore pressure onto the bonding while hardening is not necessary. Extensive bindings and parts that are under tension need as much pressure as there is enough contact between the parts that have to be adhered together. Extensive parts need to be fixed by the pressure.

Note:
After use, the epoxy resin cures in the mixing tube so that multiple use of the mixing tube not possible is. After the application DO NOT twist the mixing tube; DO NOT change the mixing tube until reuse!

You can also order separately an mixing tube (Article: HP-L4002).

Technical Data

Product Properties Epoxy System HP-E5K

Colouring: slightly yellow / clear
Mixing ratio (resin : hardener): 100 : 100
Pot life time (at 25°C): 5 minutes
Hand-tight: 10 minutes
Functional strength (100 g / 23°C): 2 h
Processing temperature (minimum): 5°C

Working Notes / Hazard Statements

Working notes and decision guidance for Epoxy Resins

Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.

Practical tips for epoxy resins (PDF)

Epoxy resin for boat building (PDF)

Decision guidance epoxy resins (PDF)

Hazard Statements

Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Hardener:
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
Piktogramm-Gefahrenhinweis-Aetzend

This product is compatible with (for example):

Mixing tube for 29g double syringe (5min...

Length: 85mm (13 mixing stages)
Diameter: fittable (Ø 1 - 4 mm)

1,89 EUR

49 g/m² Glass Fabric "Finish" Plain | HP-P49EF...

Weight:	49 g/m²
Weave:	Plain
Sizing:	Finish
Width:	127 cm

4,19 EUR

Liquid foaming agent | HP-BEL11

BEL11 Liquid foaming agent
Solution of functional carbonyl diamides
Usable with: epoxy, unsaturated polyester

To foam up of epoxy resins and to build foam laminates or in combination with sandwich materials (such as paddles or other components).

from 3,95 EUR

Neon Glitter Set 5 x 3 g | GL-5

Suitable for clear epoxy casting resins
Shades: orange, red, green, yellow, blue
Intensive reflection effect
Bright neon colours

Neon glitter decoration sprinkle in useful sprinkle tubes

4,90 EUR
0,33 EUR per g

Epoxy resin multi-purpose system for laminating, gluing and many other applications

Epoxy Resin multi-purpose system 25 min...

The Epoxy-System HP-E25KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with short working time (pot life). It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould making, Applicable from 5°C temperature

from 6,90 EUR

This product is similar to:

25 mm Flat brush natural bristle | HP-L1102...

Width:	25 mm
Bristle:	Natural bristle
Stalk:	Hardwood FSC^®

0,54 EUR

Core material - Sandwich material - approx....

HP-CORE is a high performance non-woven fabric developed specifically for the Fibre Reinforced Plastics (FRP) industry.

*Please enter below the desired quantity in m²

8,68 EUR

Customers who bought this product bought also the following products:

Fiberglass repair kit GRP | HP-KS-GFK01

With this GRP set you are able to make repairs, e.g. filing work of small holes, repairs of cracks or
repairs of osmosis affected components. This set offer a wide range of materials for the processing
from small to medium repairs.

If you do not have any experience with GRP work yet, than this set would be optimal start set for you!

76,90 EUR