80 g/m² Unidirectional Carbonfabric | HP-U080/50C

Konstruktion: 0°
Gewicht: 80 g/m²
Breite: 50 cm

Fibre orientation:

0°:	80 g/m² (HT-Fibre 50K o. 24K)
Scrim:	80 g/m² (PES)

Advantages of Carbonfabric HP-U080/50C:

Thickness and weight over the whole fabric´s width is constant
The surface of filaments are smooth, therefore the fabric is very handy to process
All filaments are strictly parallel, not twisted to the right or left
All filaments are sufficiently strained, therefore the final product have a good physical-mechanical

Areas of application:

Modelling, sport equipment making, ship and boat construction, motor sport, orthopaedic technic ...

Calculated data for hand laminate with 45 volume percent fibres:
Resin consumption: 65 g/m²
Laminate thickness: 0,10 mm
Laminate weight: 145 g/m²

► Laminate calculator
Here you can calculate specific values for your application.

Delivery notes for this product:
Standard role length: 200 m² / From 201 m² then the total quantity are on minimum 2 roles.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks for epoxy resins and fabrics in boatbuilding:
Boatbuilding (PDF)

further working notes you will find here

Decision guidance for Epoxy Resins:
Overview Epoxy Resins (PDF)

Working Notes:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of unidirectional Carbonfabrics (0°):

Unidirectional

Fibres lie in one direction (0°)
Fixed with sewing thread or with thermosetting

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,50 EUR

80 g/m² Carbon Fabric Plain | HP-P80C

Weight:	80 g/m²
Weave:	Plain
Width:	100 cm

79,98 EUR

Infusion System - Epoxy Resin | HP-E300GL...

The hardener HP-E300GL allows a pot-life of 300 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E300RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 56,50 EUR

Spray adhesive 400 ml | HP-FIX400

To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
Application in combination with the epoxy resins from HP-Textiles
Excellent spray control with adjustable spray button and dosage valve
Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials