Subscribe to Newsletter

 
 
Silicone spray 200 ml | SSP
Silicone spray 200 ml | SSP
Silicone spray 200 ml | SSP

Silicone spray 200 ml | SSP

Product No.:
BM-SSP02
ca. 1-3 days ca. 1-3 days (abroad may vary)
5,95 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Silicone spray 200 ml | SSP

Colourless lubricant and release agent based on silicone oil. Silicone spray is also used for silicone moulds.
 

Field of application:

  • Release agent for GfK and silicone moulds
  • Care agent for cured silicone moulds


Application:

  • Apply silicone spray in a suitable distance
  • Before coating of cured castings, we recommend removing silicone oils completely e.g. with thinner XB
Technical Data

Technical data 200 ml silicone spray SSP

  • Content: 200 ml
  • Colour: transparent
  • Consumption: approx. 10 ml / m2
  • Insoluble in water
Working notes / Hazard statements
Hazard statements


Danger
H222 Extremely flammable aerosol
H229 Pressurized container: may burst if heated
Gefahrenhinweis entzündlich

This product is compatible with (for example):

Silicone rubber | HP-SI6GB
Silicone rubber | HP-SI6GB
  • Medium viscous mould making
  • High tear strength
  • Working time 6-8 minutes
  • High fillable casting resin
from 20,90 EUR
Silicone rubber | HP-SI30GB
Silicone rubber | HP-SI30GB
  • Medium viscous mould making
  • High tear strength
  • Working time 30 minutes
  • Smooth cast without air bubble
from 20,90 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
Measuring Jug | 1395
Graduated Measuring Jug PP | 1395
Plastic measuring jug with spout for precise measuring by volume ratio.
  • Material PP / polypropylene
  • Natural colour
  • Chemically stable
  • Food safe
from 2,90 EUR

Customers who bought this product bought also the following products:

High-Gloss Release Agent Carnauba Wax Paste
High-Gloss Release Agent - 425g Carnauba...
  • Wax release agent for brilliant high glossy finish in moulds with smooth, non porous surfaces (metal, plastics, varnished wood or MDF)
  • Suitable for most composites mould applications with solvent free epoxy and polyester resins
  • Primer for film release agent HP-PVA
  • High-gloss release agent for working with In-Mould Coating HP-IMC (HP-Textiles)
17,90 EUR
42,12 EUR per Kg
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060...
Material: PA
Diameter: 38,20 cm
Weight: 50 g/m²
Width: 60 cm
2,61 EUR
Sealant Tape with 210 °C Temperatue resistance | HP-ST10X3/210
Sealant Tape with 210 °C Temperatue resistance...
Material: Butyl Rubber
Width: 12 mm
Thickness: 3 mm
Length: 12,5 mtr.
11,60 EUR
Standard laminating Resin Epoxy HP-E55L
Laminating System - Epoxy Resin | HP-E55L...

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR