Filler System - Epoxy Resin | HP-E30S
TOP
Epoxy filler with fine extenders | HP-E30S
The epoxy filler HP-E30S is a filled two component combination of resin and hardener with fine extenders. This filler has very good adhesion to wood, steel, polyester and other surfaces. HP-E30S is solvent-free and therefore low unpleasant odour. Further more is this epoxy filler suitable for permanent immersion in (sea) water.
Features & Benefits
-
Working time: approx. 30 minutes
-
Dust dry after approx. 120 minutes
-
Easy to send
-
Colouring: Light green - flat
-
Very good adhesion to wood, steel, polyester and other surfaces provided with fine extenders
-
Water vapour impermeable
-
Semi-flexible
-
Resistant to various chemicals
-
Among other, usable for osmosis treatment
-
Solvent-free
Product Properties Epoxy Filler HP-E30S
- Mixing ratio (weight): 100 parts resin / 50 parts hardener
- Colouring: light green - flat
- Working Time (at 20 °C): 30 min
- Dust dry after (at 20 °C): 2 h
- Recoating interval (at 25 °C): 24 h
- Viscosity: pasty
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H411 Toxic to aquatic life with long lasting effects.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
Hardener:
Danger
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
H317 May cause an allergic skin reaction.
