Main page » Dye » Dye covering » Pigment paste opaque | FPN

Pigment paste opaque | FPN

Pigment paste opaque | FPN

Product No.:: BM-FPN-R-1
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

Color:

Quantity:

43,95 EUR
43,95 EUR per Kg

incl. 19% tax excl. Shipping costs

Piece:

Description

Description

Pigment paste (liquid) | FPN

The opaque pigment pastes consist of high quality pigments, oil and certain tensides. The pigment pastes are free of solvents and volatile organic compounds. The pigment pastes are used for colouring of coatings.

Properties and fields of application:

Suitable for colouring solvent free epoxy resin and polyurethane systems
Due to its high pigment concentration very economical in consumption
good colour fidelity and reproducibility
Good colouring

Mixing ratio (guide formulation):

Coatings	10 - 15 % (by weight)
Top coat systems	5 - 10 % (by weight)
Casting and laminate resin	1 - 5 % (by weight)

This product is compatible with (for example):

28 cm plastic Stirrer | HP-L1128

Colour:	Black
Material:	Plastic
Size:	28 cm incl hole and retaining hooks

0,95 EUR

Casting system resin transparent HP-E50GB

Casting System (transparent) - Epoxy Resin...

Transparent, low shrink-casting with tacky-free surfaces
Very good flow behaviour (low-viscosity)
Cold-hardening, demouldable at room-temperature
High fillable casting resin
Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR

Light stabilizer / Anti-yellowing additive...

BEL91 is added as light stabilizer into ready mixed systems
Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR

20 cm plastic Stirrer | HP-L1120

Colour:	Red
Material:	Plastic
Size:	20 cm incl hole and retaining hooks

0,83 EUR

49 g/m² Glass Fabric "Finish" Plain | HP-P49EF...

Weight:	49 g/m²
Weave:	Plain
Sizing:	Finish
Width:	127 cm

4,19 EUR

This product is similar to:

160 g/m² Carbon Fabric Twill | HP-T160/120C...

Weight:	160 g/m²
Weave:	Twill 2/2
Width:	120 cm

instead 23,50 EUR
only 21,15 EUR
You save 10%

Carbon Fabric 245 g/m² Twill | HP-T240/150C

245 g/m² Carbon Fabric Twill | HP-T240/120C...

Weight:	245 g/m²
Weave:	Twill 2/2
Width:	120 cm

31,95 EUR

160 g/m² Spread Tow Carbon Fabric Plain - 3K-Fibre | HP-P161SC

200 g/m² Carbon Fabric Twill 2/2 Spread Tow...

Construction:	Twill 2/2
Weight:	200 g/m²
Width:	125 cm

Spread Tow, strand width approx 2 mm

34,45 EUR

Infusion System - Epoxy - Resin component...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 40,50 EUR

Customers who bought this product bought also the following products:

High-Gloss Release Agent | HP-HGR5

Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
Fast drying time (per layer <5 minutes at 20°C)
Semipermanent, external release agent with good demoulding features
Minimises remains on the moulds’ surface – and at the same time no transmission to the component

instead 9,88 EUR
only from 8,89 EUR
You save 10%

Levelling additive | HP-BEL71

BEL71 is a levelling additive
Solution of functional polyacrylates

Stir it preferably into the base resin before adding other components.
It reduces surface defects (“fish-eyes”), especially used in upper layers (topcoats). It is also possible to add the additive to the finished systems.

from 3,95 EUR