Subscribe to Newsletter

 
 
315 g/m² Unidirectional-Carbonfabric-Tape (25 mm) | HP-U315C/025
315 g/m² Unidirectional-Carbonfabric-Tape (25 mm) | HP-U315C/025
Preview: 315 g/m² Unidirectional-Carbonfabric-Tape (25 mm) | HP-U315C/025
Preview: 315 g/m² Unidirectional-Carbonfabric-Tape (25 mm) | HP-U315C/025
315 g/m² Unidirectional-Carbonfabric-Tape (25 mm) | HP-U315C/025
Mobile Preview: 315 g/m² Unidirectional-Carbonfabric-Tape (25 mm) | HP-U315C/025
Mobile Preview: 315 g/m² Unidirectional-Carbonfabric-Tape (25 mm) | HP-U315C/025

315 g/m² Unidirectional-Carbonfabric-Tape (25 mm) | HP-U315C/025

Product No.:
HP-U315C/025
ca. 1-3 days ca. 1-3 days (abroad may vary)
Minimum order:
50
Sliding scale prices
50 Meters
per 1,04 EUR
100-200 Meters
per 0,94 EUR
250-450 Meters
per 0,84 EUR
> 450 Meters
per 0,75 EUR
1,04 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

Epoxy infusion resin HP-E15GL
TOP
The hardener HP-E15GL allows a pot-life of 15minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose. 

Vacuum Infusion, Pressure Injection
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E30RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
on request
Epoxy infusion resin HP-E300GL
The hardener HP-E300GL allows a pot-life of 300 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E300RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 56,50 EUR
Epoxy infusion resin HP-E120RI
TOP

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

This product is similar to:

Customers who bought this product bought also the following products:

Carbon braided Sleeve 3K (D= 35 mm at 45°) | HP-BSC035/96/3
Material: 3K 200tex (HT-Fibre)
Number of ends: 96
Diameter at 45°: 35 mm
Area of applications: 15 - 45 mm

**Offered and sold in stretched condition!**
7,54 EUR
Standard laminating Resin Epoxy HP-E55L

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR
Mould Covering Epoxy Resin HP-E30FB
The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time
from 28,90 EUR