Main page » Additive / Fillers » Additive » Liquid foaming agent » Liquid foaming agent | HP-BEL11

Preview: HP-BEL11 a liquid foam blowing agent

Liquid foaming agent | HP-BEL11

Mobile Preview: HP-BEL11 a liquid foam blowing agent

Liquid foaming agent | HP-BEL11

Product No.:: HP-BEL11-1000
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

Quantity in ml:

36,80 EUR
36,80 EUR per Liter

incl. 19% tax excl. Shipping costs

Piece:

Description

Liquid foaming agent | HP-BEL11

The foaming agent must be stirred thoroughly. Higher speed cause to a finer dispersion, what leads to a evenly distributed foam-structure. An additional thixotropig with (approx. 5 % by weight) HP-PK22, cause to a better foam up and a more homogeneous foam structure.

Technical data:

Recommended levels:	0,5 - 4 %
Viscosity:	< 20 mPas (20°C), dünnflüssig
Density:	1,0 g / mL (20°C)

Decision guidance epoxy resins (PDF)

Areas of applications:
Can be used in our epoxy resins for e.g. paddles or various sandwich components.

Properties and application notes:

Solution of functional carbonyl diamides
This product may lead to cloud transparent resin systems (especially in case of overdose)

Working Notes / Hazard Statements

Hazard Statements:

May be fatal if swallowed and enters airways. Repeated exposure may cause skin dryness or cracking. Harmful to aquatic life with long lasting effects.

Caution:

The hydrogen produced by BEL11 is flammable and can lead to the formation of explosive oxyhydrogen mixtures if there is insufficient ventilation. Do not use in closed rooms.

Tutorials

This product is compatible with (for example):

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

Thixotropypowder | HP-PK22

Is applied as a thickening and thixotropic agent in many organic systems
Amorphous pyrogenic silica
White colloidal powder of high purity

from 5,59 EUR

49 g/m² Glass Fabric "Finish" Plain | HP-P49EF...

Weight:	49 g/m²
Weave:	Plain
Sizing:	Finish
Width:	127 cm

4,19 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Glitter Set 6 x 3 g | GL

Suitable for clear epoxy casting resins
Colours: red, purple, green, blue, gold, silver
Intensive reflection effect

Glitter decoration sprinkle in useful sprinkle tubes

2,99 EUR
0,17 EUR per g

This product is similar to:

High-Gloss Release Agent | HP-HGR5

Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
Fast drying time (per layer <5 minutes at 20°C)
Semipermanent, external release agent with good demoulding features
Minimises remains on the moulds’ surface – and at the same time no transmission to the component

instead 9,88 EUR
only from 8,89 EUR
You save 10%

Covering Colour Pigments | FD

The opaque colour pigments of the HP-FD series are used for colouring layers (gel and topcoats). They are suitable for laminating and casting resins.

Suitable for unsaturated polyester resins, epoxy resins, vinylester, polyurethan.

from 2,90 EUR

Aluminium powder | AL

• prevents running off on sloping surfaces
• making of modelling boards
• increases the compressing strength
• dosage: up to 50 %

from 8,95 EUR

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

Customers who bought this product bought also the following products:

14cm Needle Files - Perma-Grit®

Unlike conventional Needle Files Perma-Grit® files cut in any direction, and will cut Plastics, Plywood, Balsa, GRP, Carbon fibre. Perfect for small detail work in confined areas, robust long life files.

from 9,95 EUR

59cm - 200g/m² Bidiagonal carbon fabric HP-B200/59C

59cm - 200g/m² Bidiagonal carbon fabric SP-B200/59C...

**Special item from larger industrial production, Partially slight gaps, fuzzballs or missing sewing threads, otherwise good quality.**

weight: 214 g/m²
width: 59 cm
+45° 100 g/m² HT-Fibre 50K
Thread scrim 9 g/m²
- 45° 100 g/m² HT-Fibre 50K

instead 18,45 EUR
only 13,84 EUR
You save 25%