Subscribe to Newsletter

 
 
Triplex Mesh for Vacuum Processes | HP-TX280/150
Triplex Mesh combines three vacuum assist materials in one: peel ply, perforated film and mesh
Preview: Triplex Mesh for Vacuum Processes | HP-TX280/150
Preview: Triplex Mesh combines three vacuum assist materials in one: peel ply, perforated film and mesh
Triplex Mesh for Vacuum Processes | HP-TX280/150
Mobile Preview: Triplex Mesh for Vacuum Processes | HP-TX280/150
Mobile Preview: Triplex Mesh combines three vacuum assist materials in one: peel ply, perforated film and mesh

Triplex Mesh for Vacuum Processes | HP-TX280/150

Product No.:
HP-TX280/150
ca. 1-3 days ca. 1-3 days (abroad may vary)
Minimum order:
5
Sliding scale prices
5-9,9 m²
per 6,55 EUR
10-24,9 m²
per 5,97 EUR
25-74,9 m²
per 5,12 EUR
75-149,9 m²
per 4,33 EUR
150-299,9 m²
per 3,80 EUR
> 299,9 m²
per 3,39 EUR
6,55 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

infusionsystem resin and hardener HP-E200GL
The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
from 5,90 EUR
PE hose for vacuum moulding standard | HP-VZ1010
The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.
 
Available dimensions:
Material: PE
Outer-Ø: 10 mm
Inner-Ø: 8 mm
1,33 EUR
High performance laminating system HP-E29L

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR

Customers who bought this product bought also the following products:

Epoxy infusion resin HP-E120RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR
Epoxy infusion hardener HP-HTE30RI

The hardener HP-E30RI allows a pot-life of 30 minutes.
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different hardeners for severals applications. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 21,90 EUR