Main page » Reinforcement Fabrics » Multiaxial Glass Fabrics » Triaxial 0/+45/-45° » 750 g/m² Glass fabric Triaxial | HP-T750E

750 g/m² Glass fabric Triaxial | HP-T750E

Name: 750 g/m² Glass fabric Triaxial | HP-T750E
SKU: HP-T750E-H
Price: 4.34 EUR
Availability: InStock

Product No.:: HP-T750E-H
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²
Minimum order:: 31,75

Sliding scale prices

31,75 m²: per 4,34 EUR
63,5-95,25 m²: per 3,55 EUR
127-222,25 m²: per 3,36 EUR
254-476,25 m²: per 3,15 EUR
508-984,25 m²: per 2,86 EUR
1016-2000,25 m²: per 2,76 EUR
> 2000,25 m²: per 2,67 EUR

4,34 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

750 g/m² Glass fabric Triaxial | HP-T750E | Complete rolls of 31,75 m²

If you do not require complete rolls of 31,75 m², you can go directly to the article for smaller quantities here.

Per roll:	31,75 m²
Construction:	Triaxial 0°/-45°/+45°
Weight:	750 g/m²
Width:	127 cm

Fibre orientation:
0°:	280 g/m² (E-Glass)
-45°:	235 g/m² (E-Glass)
+45°:	235 g/m² (E-Glass)
Stitching /-type:	6 g/m² (PES) / pillar
Total areal weight:	756 g/m²

Areas of application:

Aircraft construction, sport equipment making, ship and boat construction, sports industry, container construction, wind energy, motor sport, ...

Laminate calculator:
This allows you to determine characteristic values specifically for your application (hand laminate, vacuum compression, vacuum infusion).

Working Notes & Support

Working Notes:
In this guide you will find tips & tricks for processing fiber composites:
Instructions for epoxy resins in boatbuilding (PDF)

further working notes you will find here

Decision-making aid for choosing the right epoxy resin:
Overview Epoxy Resins (PDF)

Laminate Calculator:
You can use this to determine characteristic values specifically for your application (hand laminate, vacuum compression, vacuum infusion).

Characteristics of triaxial Glass fabrics:

Non-woven textiles
Three layers
Normally 0°/-45°/+45°
Fixed with a sewing thread

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

750 g/m² Glass fabric Triaxial | HP-T750E...

Construction:	0°/-45°/+45°
Weight:	750 g/m²
Width:	127 cm

6,90 EUR

Infusion System - Epoxy Resin | HP-E300GL...

The hardener HP-E300GL allows a pot-life of 300 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E300RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 56,50 EUR

High performance laminating system HP-E29L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 26,50 EUR

20 mm Laminating brush | HP-L1071

Width:	20 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

1,07 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

1000 g/m² Glass fabric finish for mould construction...

Weight:	1000 g/m²
Width:	100 cm
Weave:	HD-Plain

29,97 EUR

Customers who bought this product bought also the following products:

Vacuum Flat Channel, 50 mm | HP-VZ1520

Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:

No print on the laminate
Excellent resin flow
Easy application and easy cut

1,82 EUR

Vacuum Flat Channel, 100 mm | HP-VZ1530

Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:

No print on the laminate
Excellent resin flow
Easy application and easy cut

2,33 EUR

Infusion Connector 12 mm | HP-VZ1550

No imprints in the laminate and easy handling combined with the vacuum flat channel HP-VZ1520 (50 mm) or HP-VZ1530 (100 mm)

3,96 EUR

PE hose for vacuum moulding standard | HP-VZ1020...

The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.

Available dimensions:
Material:	PE
Outer-Ø:	12 mm
Inner-Ø:	10 mm

1,48 EUR